Slim and Compact Shower Door Seals
GoldRays manufactures compact-series shower door seal profiles and supplies established GS models for B2B and OEM/ODM projects. The published range below provides profile images and dimensional references for varied glass-edge positions in shower enclosures, bath screens and related panel systems.
The category name does not define compatibility. Each compact-series profile must be reviewed for its intended edge, glass thickness, door movement, gap and contact direction. GoldRays can compare a cross-section drawing, physical sample or clear side-view photographs with an existing model before a custom route is considered.
Information needed to select a compact shower door seal
| Buyer input | What to provide |
|---|---|
| Required function | Identify the glass edge and the gap, contact or separation function the profile should address. |
| Door or panel movement | Show whether the relevant glass is fixed, swinging, sliding or folding. |
| Glass thickness | Measure the glass that receives the profile rather than estimating from the enclosure. |
| Gap and contact direction | Record the distance to the adjacent panel or surface and show the direction of contact. |
| Existing profile | Send a cut sample, cross-section drawing or clear side-view photographs with measurements. |
| Project requirements | Include required length, expected quantity, destination market and packaging or documentation needs. |
The model tables are published dimensional references and should be reviewed with their corresponding images where available. A similar glass-thickness value does not by itself confirm compatibility; the complete section, function, mounting edge and panel movement must also be checked.
Models
| Glass | a | b |
|---|---|---|
| 8mm | 6 | N |
| 8mm | 16, 10 | N |
| 10mm | 16 | N |
| 12mm | 8 | N |
| Glass | a | b |
|---|---|---|
| 8mm | 16 | N |
| 10mm | 16 | N |
| Glass | a | b |
|---|---|---|
| 8mm | 15, 23, 31 | N |
| 10mm | 16.5, 14.5 | N |
| Glass | a | b |
|---|---|---|
| 8mm | 9 | N |
| 10mm | 12, 10 | N |
| Glass | a | b |
|---|---|---|
| 8mm | 16 | N |
| 10mm | 16 | N |
| Glass | a | b |
|---|---|---|
| 8mm | 8 | N |
| Glass | a | b |
|---|---|---|
| 8mm | 6 | N |
| Glass | a | b |
|---|---|---|
| 8mm | 5 | N |
| Glass | a | b |
|---|---|---|
| 8mm | 8 | N |
| Glass | a | b |
|---|---|---|
| 8mm | 14 | 17 |
| 8mm | 16 | 20 |
| 10mm | 16 | 18 |
| Glass | a | b |
|---|---|---|
| 8mm | 16 | N |
| Glass | a | b |
|---|---|---|
| 8mm | 18 | 11 |
| 10mm | 18 | 11 |
How compact-series shower seal profiles are reviewed
Profile function and mounting edge
Mark the exact glass edge on an enclosure drawing and state the function required at that position. The compact-series label groups the published models, but it does not replace application review for the individual section.
Glass thickness and gripping channel
The measured glass thickness is a primary selection input because the gripping channel must correspond to the glass edge. Use the published table for the relevant GS model as a reference, then confirm the complete section before ordering.
Movement, gap and contact direction
Show whether the panel is fixed, swinging, sliding or folding, and provide photographs in the relevant open and closed positions. Measure the gap at the actual mounting edge and show the direction in which the flexible section should contact the adjacent surface.
Established GS model or custom profile
An existing model may provide a suitable starting point when its section and dimensions correspond to the project. If the published range does not match the required geometry, GoldRays can review the enquiry through its custom shower door seal profile process using a drawing or physical sample.
Compact seal enquiry workflow
- Application review: identify the function, mounting edge, panel movement, glass thickness and gap.
- Profile comparison: compare the buyer’s drawing, sample or photographs with the published GS models.
- Specification clarification: confirm the section, dimensions, length, expected quantity, market and packaging requirements.
- Sample or specification confirmation: agree the profile information used for the supply review.
- Commercial review: confirm the B2B project details before production planning.
When the required function is already known, also review bottom shower door seals, magnetic shower door seals, sliding shower door seals, or the broader standard shower seal range.
Frequently asked questions
Does GoldRays manufacture compact shower door seal profiles?
Yes. GoldRays manufactures and supplies the published GS profile models for B2B buyers. The available images and dimension tables provide references for comparison with a buyer’s application.
Does every compact-series model fit the same application?
No. Each model has its own section and dimensional references. Suitability depends on the glass thickness, mounting edge, gap, required function and panel movement.
Can I select a compact seal using glass thickness only?
No. Glass thickness is necessary, but the channel shape, flexible section, function, gap and movement also affect compatibility.
Can GoldRays compare an existing compact seal sample?
GoldRays can review a cut sample, cross-section drawing or clear side-view photographs against existing models. Include measurements and photographs of the installed position.
What if a published model has no current product image?
Use its published model and table only as an initial reference and send the application drawing or sample to GoldRays for clarification. Do not infer the missing section from another model’s gallery.
Can GoldRays review a custom compact profile?
A custom route can be discussed when an existing model does not match the required section. Send the drawing or sample, application details and expected project requirements for evaluation.
What should I send for a quotation?
Email goldrays@showerdoorseal.org with the model or profile drawing, glass thickness, mounting edge, required function, gap, panel movement, length, expected quantity and destination market.
What makes a seal compact?
A compact seal is a smaller profile that is less visible on frameless glass. Our 12 GS-series compact seals fit 8, 10 and 12 mm glass.
Supply terms
- Minimum order: 500 m per model as a guide; smaller runs are often possible
- Lead time: 3 to 4 weeks for standard orders
- Samples: free, cut lengths up to 1 m
- Custom profiles: tooling typically USD 300 to 400, exclusive to you
- Testing: SGS UV-ageing, mould and REACH SVHC results, see the test results
- Contact: goldrays@showerdoorseal.org
Request a quote · Order free samples
Request a compact shower seal review
Compare the published models and send the available measurements, drawings or sample photographs to goldrays@showerdoorseal.org. GoldRays will review whether an existing profile can be evaluated for the application or whether a custom discussion is more appropriate.
This post is also available in:
