Shower Seal Guides

OUR POSTS

Eight seal applications, including a bottom wipe, deflector, two-part magnetic pair, sliding overlap and retained frame insert.

8 Types of Shower Door Seals and Where They Fit

April 15, 2020

8 main shower door seal types, from sweeps and drip rails to magnetic, sliding and bifold seals: where each sits, which leak it fixes, how to specify it.

Illustration of a test report checklist (sample, method, result) next to a magnifying glass over a shower seal

Shower Seal Test Reports: What Buyers Should Check

April 15, 2020

Match a shower seal test report to the ordered product, understand its limits and identify the physical checks still needed before approval.

Illustration of the two halves of a magnetic shower door seal pair between two glass panels

Magnetic Shower Door Seal Replacement: Check the Pair Before You Cut

April 7, 2020

Check both magnetic halves, the closing gap and the bottom junction before replacing a shower door seal.

Start with the position, then check the fit.

Which Shower Seal Should I Buy? Start with the Position and Fit

March 9, 2020

Choose by the edge, attachment, glass thickness and working gap before comparing material claims or price.

Illustration of a factory, a full-length seal sample with a ruler, and an approved specification sheet

How to Find and Compare a Shower Seal Supplier

March 9, 2020

Choose the right supply route, give suppliers the same brief and compare sample approval, delivered cost and repeat-order control before committing to volume.

Turn a sample into clear acceptance criteria.

6 Shower Seal Quality Checks Before You Place an Order

March 5, 2020

Six practical checks for approving shower seals: fit, appearance, durability evidence, function, repeat-order consistency and protection during delivery.

Inspect the seal before scrubbing or soaking.

How to Remove Mould from Shower Door Seals

December 26, 2019

How to remove black mould and limescale from shower door seals without damaging clear plastic, when mould means replacement, and how to stop it coming back.

Choose a route for the problem you need to solve.

Shower Door and Seal Reading Guide: Find the Right Help

October 31, 2019

Find the right shower-seal guide for identification, leaks, measurements, care or a trade enquiry.

The installed position matters more than the nickname.

Shower Door Wipes and Seals: Identify the Part You Need

October 28, 2019

Identify a shower-door wipe by its fitted position, end section and attachment, then send four useful photos to find a match.

PVC Shower Door Seals: Materials, Fit and What to Check

October 28, 2019

Understand the different jobs within a PVC shower seal, compare actual samples and check the surfaces, cleaners and evidence relevant to your application.

Distinguish dirt, damaged material and poor fit.

Shower Door Sweeps: Clean, Check or Replace?

October 18, 2019

Inspect the bottom sweep for deposits, tears and interference, then choose cleaning, replacement or a fitting check.

Match the screen, bath rim and movement together.

Bath Screen Seal Manufacturer and Supplier in China

October 1, 2019

Prepare a bath-screen seal enquiry with the profile section, glass and gap dimensions, movement and sample requirements.

Two compatible magnetic shower seal halves meeting at the closing edge.

Magnetic Shower Seals: A Practical Buyer’s Guide

September 26, 2019

Find the leak or closing problem, measure both sides and confirm the magnetic pair before trimming or ordering a replacement.

The same-length flexible lip before contact and with gentle deflection against the mating surface.

Shower Door Lip Seals: What They Are and How to Choose

September 20, 2019

Match a lip seal by its attachment, reach, contact direction and door movement—not the product name alone.

Each edge manages a different water path.

Shower Door Seals Explained: How the Parts Work Together

September 12, 2019

See how seals, deflectors and fixed joints work together, identify an unfamiliar part and trace a leak before choosing a replacement.

A glass-thickness label is not a gap measurement.

Sealing Strips for Shower Doors: How to Read a Product Listing

August 27, 2019

Decode a shower-seal listing before ordering: separate glass size from gap, confirm the fitting method and check whether the quoted unit includes every part.

Check the lower gap and the full opening path.

Shower Door Bottom Seals and Sweeps

August 22, 2019

What a shower door bottom seal does, the main types (sweep, drip rail, bubble), how to measure and fit one so corners don't leak, and when to replace it.

Three measurements: thickness across the two bare-glass faces, the closing gap, and the installed seal run.

How to Measure for a Shower Door Seal: Thickness, Gap and Length

June 10, 2019

Measure glass thickness, the closed gap and the required seal length separately, then add photos of the section and door movement.

Confirm the part before removing the old seal.

How to Replace a Shower Door Seal

June 10, 2019

Replace a shower door seal in about 15 minutes: identify the type, measure glass thickness and gap, remove the old seal, fit, trim and test.

Condition and leak location guide the next action.

When Should You Replace a Shower Door Seal?

June 7, 2019

Use damage, fit and the first leak location to decide between cleaning, seal replacement and enclosure repair.

Use the part name and its installed position.

Shower Door Seal Glossary: Sweeps, Wipes, Lips and Jambs

June 7, 2019

Shower door seal names explained: sweep, wipe, drip rail, lip, bubble, h-jamb, magnetic seal and glass-to-glass connector, and how to order each one.

This post is also available in: French Spanish German Italian Polish Portuguese Dutch Russian Arabic

Contact GoldRays

Questions, quotes or samples — email us at goldrays@showerdoorseal.org.

If you are asking about a quote or a sample, it helps to mention the application, glass thickness, length and quantity, and your market — and to attach a drawing or photo if you have one. Not required, just faster.

+86 757 8383 9170

2409, Building 2, Zhongqu, Chengshi Garden, Linnandadaobei, Foshan 528000, China

Download the GoldRays catalogue (PDF)

GoldRays is a China-based manufacturer and B2B supplier of shower door seals, including custom shower-seal development. We supply shower seals and related gaskets to shower-door and glass-hardware businesses worldwide.

Contact Details

ADDRESS
2409, Building 2, Zhongqu, Chengshi Garden, Linnandadaobei, Foshan 528000, ChinaCONTACT PERSON: Raymond

EMAIL: goldrays@showerdoorseal.org
PHONE NO. +86 757 8383 9170

This post is also available in: French Spanish German Italian Polish Portuguese Dutch Russian Arabic