Swinging Shower Door Seals Manufacturer and Supplier
GoldRays manufactures swinging shower door seals and supplies established sealing profiles for B2B and OEM/ODM projects. The published models below provide profile images and dimensional references for hinged shower doors, bath screens and related glass-panel systems.
A swinging door seal must be reviewed through the full door movement. Provide the glass thickness, hinge side, swing direction, seal position and the gap or contact direction at the relevant edge. GoldRays can compare a cross-section drawing, physical sample or clear side-view photographs with an existing profile before a custom route is considered.
Information needed to select a swinging shower door seal
| Buyer input | What to provide |
|---|---|
| Door movement | Show whether the door swings inward, outward or both, including the fully open and closed positions. |
| Seal position | Identify the hinge edge, closing edge, bottom edge or other glass edge receiving the profile. |
| Glass thickness | Measure the glass that receives the profile rather than estimating from the enclosure. |
| Gap and contact direction | Record the distance to the adjacent panel, wall, floor or threshold and show how the profile should meet it. |
| Existing profile | Send a cut sample, cross-section drawing or clear side-view photographs with measurements. |
| Project requirements | Include required length, expected quantity, destination market and packaging or documentation needs. |
The model tables are published dimensional references and should be reviewed together with the corresponding images. A similar glass-thickness value does not by itself confirm compatibility; the complete section, mounting edge and swing clearance must also be checked.
Models
| Glass | a | b |
|---|---|---|
| 6mm | 10 | 6 |
| 8mm | 10 | 6 |
| 10mm | 10 | 6 |
| 12mm | 11 | 6 |
| Glass | a |
|---|---|
| 6mm | 10,15 |
| 8mm | 9 |
| 10mm | 10or12 |
| 12mm | 11 |
| Glass | a | b |
|---|---|---|
| 8mm | 10 | 11 |
| 10mm | 10 | 11 |
| 12mm | 13 | 14 |
| Glass | a | b |
|---|---|---|
| 8mm | 10 | 5 |
| 10mm | 11 | 5 |
| Glass | a | b |
|---|---|---|
| 6mm | 11 | 6 |
| 8mm | 12 | 6 |
| 10mm | 12 | 6 |
| 12mm | 12 | 6 |
| Glass | a | b |
|---|---|---|
| 6mm | 6 | 13 |
| 8mm | 9 | 10 |
| 10mm | 10 | 14 |
| Glass | a |
|---|---|
| 6mm | 5.5 |
| 8mm | 8 |
| 10mm | 5.5 |
| 12mm | 9 |
| Glass | a | b |
|---|---|---|
| 6mm | 8 | 5 |
| 8mm | 10 | 8 |
| 10mm | 10 | 8 |
| 12mm | 10 | 9 |
How swinging shower door profiles are reviewed
Swing direction and movement clearance
Show the door in both open and closed positions and identify whether movement is inward, outward or bidirectional. The profile channel and flexible section should be reviewed through the complete swing path so the selected section does not obstruct the intended movement.
Glass thickness and gripping channel
The measured glass thickness is a primary input because the gripping channel must correspond to the glass edge. Use the table for the relevant model as a reference, then confirm the complete cross-section and application before ordering.
Mounting edge, gap and contact direction
A hinged enclosure can require different profile functions at the hinge, closing and bottom edges. Mark each position on a drawing, measure the actual gap and show the direction in which the flexible section should contact the adjacent surface.
Established model or custom profile
An existing model may provide a suitable starting point when its section and dimensions correspond to the project. If the published range does not match the required geometry, GoldRays can review the enquiry through its custom shower door seal profile process using a drawing or physical sample.
Swinging door seal enquiry workflow
- Application review: identify the swing direction, hinge position, mounting edge, glass thickness and gap.
- Profile comparison: compare the buyer’s drawing, sample or photographs with the published models.
- Specification clarification: confirm the section, dimensions, length, expected quantity, market and packaging requirements.
- Sample or specification confirmation: agree the profile information used for the supply review.
- Commercial review: confirm the B2B project details before production planning.
A swinging enclosure may use several profile functions. Review bottom shower door seals for the lower edge, magnetic shower door seals for compatible closing edges, bifold shower door seals for folding-panel projects, and the standard shower seal range for additional door and panel arrangements.
Frequently asked questions
Does GoldRays manufacture swinging shower door seals?
Yes. GoldRays manufactures and supplies swinging shower door seal profiles for B2B buyers. The published models provide images and dimension tables for comparison with a buyer’s door arrangement.
How do I choose a swinging shower door seal?
Provide the swing direction, hinge position, seal location, glass thickness, gap, contact direction and a profile cross-section or clear photographs. Review the complete door movement rather than one dimension alone.
Can I select a profile using glass thickness only?
No. Glass thickness is necessary, but the channel geometry, flexible section, mounting edge, gap and swing clearance also affect suitability.
Can GoldRays compare an existing swinging seal sample?
GoldRays can review a cut sample, cross-section drawing or clear side-view photographs against existing profiles. Include measurements and photographs of the installed position.
Are bottom and magnetic profiles the same as swinging door seals?
They describe different profile functions, although one enclosure may use more than one category. Review each mounting position independently and confirm how the profiles interact when the door swings and closes.
Can GoldRays review a custom swinging-door profile?
A custom route can be discussed when an existing model does not match the required section. Send the drawing or sample, application details and expected project requirements for evaluation.
What should I send for a quotation?
Email goldrays@showerdoorseal.org with the model or profile drawing, glass thickness, gap, swing direction, hinge position, required length, expected quantity and destination market.
Request a swinging shower seal review
Compare the published models and send the available measurements, drawings or sample photographs to goldrays@showerdoorseal.org. GoldRays will review whether an existing profile can be evaluated for the application or whether a custom discussion is more appropriate.
