Shower Door Seals for 6 mm (1/4″) Glass
GoldRays lists 70 shower door seal models for 6 mm (1/4″) glass on its product pages, in 10 categories: 12 bottom seals, 6 swinging door seals, 17 magnetic seals, 5 sliding door seals, 2 bifold door seals, 3 glass connectors, 12 versatile door seals, 12 SuperClear seals, 2 adhesive seals, 2 miscellaneous seals. Some models appear in more than one category, so the category figures add up to more than 70. Every model below has 6 mm glass stated in its own table on goldrays.com.
Glass thickness tells you which seals will grip the glass. You also need the gap the seal must close and where it sits on the door. If you are unsure, see how to measure for a shower door seal or email a photo with measurements to goldrays@showerdoorseal.org.
How to read the tables
The letters a and b refer to the drawing for each model on its category page, so each model links to that page. The dimensions shown are the ones listed for 6 mm glass; the same model usually has different dimensions for other glass thicknesses. Where a table shows N, the page gives no fixed figure, so ask GoldRays to confirm it. Where several sizes are listed for the same glass, they are separated by a slash.
| Category | Models for 6 mm glass |
|---|---|
| Bottom Seals | 12 |
| Swinging Door Seals | 6 |
| Magnetic Seals | 17 |
| Sliding Door Seals | 5 |
| Bifold Door Seals | 2 |
| Glass Connectors | 3 |
| Versatile Door Seals | 12 |
| SuperClear Seals | 12 |
| Adhesive Seals | 2 |
| Miscellaneous Seals | 2 |
Bottom Seals for 6 mm glass
For the lower edge of a door or screen (sweeps and drip seals). Drawings and full specifications: Bottom Seals.
| Model | Dimensions for 6 mm glass (mm) |
|---|---|
| 007G | a = 7 or 15; b = 10 |
| 009 | a = 10; b = 10 |
| 009A | a = 11; b = 8 |
| 009A1 | a = 11; b = 8 |
| 009A2 | a = 12, 17, 23; b = 10 |
| 009B | a = 8; b = 7 |
| 009B1 | a = 8; b = 13 |
| 009C | a = 8; b = 13 |
| 009D | a = 12; b = N |
| 009D1 | a = 22; b = N |
| 009F1 | a = 11; b = 11 |
| 005C | a = 15; b = N |
Swinging Door Seals for 6 mm glass
For hinged and pivot doors. Drawings and full specifications: Swinging Door Seals.
| Model | Dimensions for 6 mm glass (mm) |
|---|---|
| 003A | a = 10; b = 6 |
| 003A2 | a = 10, 15 |
| 005A | a = 11; b = 6 |
| 005D | a = 6; b = 13 |
| 007B | a = 5.5 |
| 0011A | a = 8; b = 5 |
Magnetic Seals for 6 mm glass
For the closing edge, where a magnetic pair holds the door shut. Drawings and full specifications: Magnetic Seals.
| Model | Dimensions for 6 mm glass (mm) |
|---|---|
| S008A1W | a = 16; b = 20 |
| 008A | a = 14; b = 21 |
| 008A1W | a = 14; b = 21 |
| 008AW | a = 16; b = 22 |
| 008B | a = 18; b = N |
| 008BW | a = 18; b = N |
| 008C | a = 18.5; b = 11 |
| 008CW | a = 18.5; b = 11 |
| 008C1 | a = 18; b = 14 |
| 008C1W | a = 18; b = 14 |
| 008E | a = 20; b = N |
| 008EW | a = 20; b = N |
| 008F & 008FW | a = 10; b = 5 |
| 008F2 | a = 12.5; b = N |
| 008G | a = 23; b = N |
| 008GW | a = 23; b = N |
Sliding Door Seals for 6 mm glass
For sliding doors. Drawings and full specifications: Sliding Door Seals.
| Model | Dimensions for 6 mm glass (mm) |
|---|---|
| 004 | a = 8, 12, 16, 25; b = N |
| 004A | a = 14; b = 8 / a = 22; b = 16 / a = 28; b = 13 |
| 007A | a = 18; b = 10 |
| 014 | a = 16; b = N |
| 027 | a = 3.2; b = 1.7 |
Bifold Door Seals for 6 mm glass
For bifold doors. Drawings and full specifications: Bifold Door Seals.
| Model | Dimensions for 6 mm glass (mm) |
|---|---|
| 006 | a = 20; b = N |
| 006A | a = 40; b = N |
Glass Connectors for 6 mm glass
For glass-to-glass joints between panels. Drawings and full specifications: Glass Connectors.
| Model | Dimensions for 6 mm glass (mm) |
|---|---|
| 010A | a = N; b = 20 |
| 026 | a = 24; b = N |
| IS180 | a = 8; b = 4.8 |
Versatile Door Seals for 6 mm glass
Multi-purpose profiles for side and bottom positions. Drawings and full specifications: Versatile Door Seals.
| Model | Dimensions for 6 mm glass (mm) |
|---|---|
| 004 | a = 8, 12, 16, 25; b = N |
| 002 | a = 20, 25 |
| 001 | a = 12 |
| 003 | a = 16, 25 |
| 003A1 | a = 22; b = 10 |
| 005 | a = 16 |
| 005B | a = 16 |
| 007 | a = 7 |
| 007A1 | a = 13 |
| 015 | a = 3.5 |
| 015B | a = 3; b = 2.6 |
| 013 | a = 8 |
SuperClear Seals for 6 mm glass
The SuperClear range of high-clarity seals. Drawings and full specifications: SuperClear Seals.
| Model | Dimensions for 6 mm glass (mm) |
|---|---|
| S003 | a = 16, 18; b = N |
| S005 | a = 16, 18; b = N |
| S007 | a = 7; b = N |
| S003A2 | a = 7; b = N |
| S004 | a = 15; b = N |
| S007G | a = 7; b = 6 |
| S009A1 | a = 21.5; b = 9 |
| S009B1 | a = 6; b = 11 |
| S010H | a = 8; b = N |
| S010H1 | a = 8; b = N |
| S008A1 | a = 16; b = 20 |
| S008A1W | a = 16; b = 20 |
Adhesive Seals for 6 mm glass
For self-adhesive fixing. Drawings and full specifications: Adhesive Seals.
| Model | Dimensions for 6 mm glass (mm) |
|---|---|
| IS-180 | a = 8; b = 4.8 |
| F295 | a = 8; b = 7.5 |
Miscellaneous Seals for 6 mm glass
Special and wall profiles. Drawings and full specifications: Miscellaneous Seals.
| Model | Dimensions for 6 mm glass (mm) |
|---|---|
| 018 | a = 5; b = 10 |
| 020B | a = 10 |
Samples and orders
GoldRays has made shower seals in Foshan, Guangdong, China since 2001. Free samples up to 1 m are available, the minimum order is 500 m per model (smaller runs are possible), and lead time is typically 3 to 4 weeks.
Request a quote · Order free samples
Other glass thicknesses: 8 mm · 10 mm · 12 mm.
Frequently asked questions
What shower door seal fits 6 mm glass?
Any seal listed for 6 mm (1/4″) glass is sized to fit it, but choose by position too: bottom seals for the lower edge, magnetic seals for the closing edge, and glass connectors between fixed panels. GoldRays lists 70 models for 6 mm glass, shown in the tables above.
Will a seal for 6 mm glass fit other thicknesses?
Usually not. A seal made for thicker glass tends to slip, and one made for thinner glass usually will not push on. Many GoldRays models come in several sizes, one for each glass thickness, so order the size listed for 6 mm and measure the glass edge first.
What do a, b and N mean in the tables?
They refer to the drawing for each model on its category page. Open the linked page to see which part of the profile each letter measures. N means no fixed figure is given, so ask GoldRays for the value you need.
Can GoldRays make a seal that is not listed?
Yes. Send a drawing, a photo with measurements or a piece of the old seal to goldrays@showerdoorseal.org. GoldRays has more than 3,200 moulds, so an existing profile may already match. If a new profile is needed, tooling for a custom profile costs USD 300 to 400.
Are samples free?
Yes. Samples up to 1 m are free. The minimum order is 500 m per model, smaller runs are possible, and lead time is 3 to 4 weeks.
This post is also available in:
