How to Clean the Shower Seals

        First of all, let us get down to the importance of installing shower seals around the shower doors. The shower seals and profiles are made from clear PVC, EVA or polycarbonate and are used for shower door sealing and various glass door applications to prevent water leakage, air infiltration and cushion impact. It works with straight, curved, pivot and sliding glass doors. With a high-standard quality control system, the product is second to none in terms of durability, transparency and rigidness. Some showers are sealed with different materials, so the cleaning methods are different.

The cement slurry is a mixture of sand and cement. So if you don’t seal the grout, it will absorb water, bacteria and stains. Adding cement slurry sealer can protect cement slurry to make it waterproof and resist moisture and bacteria. Sealing the grout helps to extend the appearance, texture, and consistency of the grout and prevent mildew and mildew. Your grout will look better and last longer.

Some showers are sealed with different materials, so the cleaning methods are different. With anti-UV and anti-mold additives added to the raw materials making the color of the product unchanged for up to 5 years.Transparent and super clear, leaving an “all-glass” appearance. Highly rigid and great impact resistance. Very compressible and great elasticity impresora：Perfect combination of soft and hard material makes the product an ideal solution for bathroom sealing. Strong magnet strength for a perfect seal.Multiple choices of color to go with your brilliant design, professional custom-made products with affordable tooling cost.

What makes a shower door seals dirty?

        Seeing the dirty spots on the shower seals, you might wonder what on earth are them? Actually the rubber caulk seal around your shower door keeps water from leaking out onto your floor, but it also can trap soap scum and bacteria. If your bathroom stays warm and damp, mildew can start to form around the shower’s rubber seal. Commercial mildew and soap-scum cleaners are formulated to clean it, but you don’t have to use harsh chemicals. Don’t replace shower caulk until you’ve tried cleaning; even if the seal is black, you may be able to whiten it again. Small black spots on the seal around the shower door indicate the presence of mold, which is an early stage of mold. These fungi thrive in humid environments. If you don’t ventilate or wipe the shower after each use, you may end up with visible black spots. But with a few cheap cleaners or home-made cleaning solutions, you can get rid of the mold and keep your bathroom door airtight.

Where do molds usually come from?

        You might think your shower room is sealed properly and that’s no way for the molds to come into your shower room. As a matter of fact, mold thrives in warm, damp places that are not ventilated, which makes your bathroom, laundry, kitchen, and basement ideal places for mold growth because air circulation is usually poor and humidity is always high. So you may find mold in these rooms – on walls, between tiles, between caulking, or on the ceiling.

What are the hazards of mold?

        The mold growth on the cement slurry will not only make your bathroom, shower tiles and kitchen look dirty and old, but also pose a serious threat to your health and even damage the structural integrity of your home. You need to find effective ways to clean the cement paste and prevent mold growth to prevent problems caused by mold and save yourself time and money.

Multiple methods of cleaning shower door seals

• Borax or Baking Soda：Baking soda is an effective self-made detergent, which can clean cement paste naturally. Although baking soda is very effective in cleaning the mold in the shower slurry, it will not discolor or damage the tiles, nor bring any health risks to you and your family. Borax is very alkaline, it is a very effective Tile Cleaner, disinfectant and deodorant.

1. Mix 1 cup of borax powder or baking soda with 2 tablespoons of mild liquid soap, such as castile soap or dish-washing liquid. Add 2 cups of hot water and stir.
2. Dip a soft toothbrush into the liquid and scrub the rubber seal. Leave the mixture on for 15 minutes.
3. Rinse by filling a large cup with warm water and pouring the water over the seal.

Caution: baking soda may not be as effective as bleach in cleaning and killing mold spores. There are different ways to clean cement paste with baking soda.

• Vinegar：Vinegar is an excellent natural cleanser, you can use it as a self-made mold cleaner. Because it’s acidic, it creates an environment that prevents mold and bacteria from growing.

Method One:

1. Mix 1 cup of white vinegar with 1 cup of water in a spray bottle. Add 1 teaspoon of castile soap or dish-washing liquid.
2. Spray the seal with the vinegar mixture. Leave the mixture on for 15 minutes.
3. Scrub the seal with a soft toothbrush, spraying each section again just before scrubbing.
4. Rinse by filling a large cup with warm water and pouring the water over the seal.

Method Two:

1. Mix 1/4 cup liquid chlorine bleach with 3/4 cup of water in a spray bottle.
2. Turn on the bathroom vent or open the windows.
3. Spray the seal with the bleach mixture. Let it sit for 15 minutes.
4. Put on rubber gloves and scrub the seal with a soft toothbrush, spraying each section again just before scrubbing.
5. Rinse by filling a large cup with water and pouring it over the rubber seal.

Note: if the shower mold grows very widely and is difficult to clean, then vinegar natural products may not be enough to effectively clean the cement paste and remove mold and mold from the tile surface.

• Chlorine bleach：It not only cleans the mold effectively but also kills the mold spores and disinfects the entire area. It also removes soap residue from cement paste and tiles.

Method One:

1. In a spray bottle, mix 1 part chlorine bleach and 4 parts water.
2. Spray the cement slurry cleaner on the affected area and wait for about 30 minutes.
3. Then, use a toothbrush to scrub the grout lines on the tiles.
4. Rinse with cold water. Repeat the process if necessary.

Method Two:

1. Use a toothbrush to directly wipe the chlorine bleach on the mold or mold.
2. Leave the bleach on the grout for about 20-30 minutes, then rinse with warm water.
3. Repeat the process if necessary.

Method Three:

1. Pour 1 / 2 cup hot tap water and 1 / 2 cup distilled white vinegar into the spray bottle. Add a large amount of dish-washing liquid to the mixture. Change the nozzle and shake the bottle to mix the ingredients.
2. Spray the vinegar solution on the shower door seal. For hard mold and mildew, let it stand for 15 minutes.
3. Soak an old soft toothbrush in vinegar and wipe the mold off. Rinse with water.
4. Dry the shower door seal with a rag or microfiber cloth.

Method Four:

1. Put on rubber gloves, open all the windows in the bathroom or open the exhaust fan.
2. Add 2 tbsp bleach to 1 cup of hot water in the spray bottle. Change the sprayer and shake the bottle to mix.
3. Apply bleach and water solution directly to the shower door seal. Allow the solution to stand for about 15 minutes to form a hard plaque.
4. Take an old soft toothbrush to wash the stubborn mold and mildew on the sealing strip of the shower door. Thoroughly wet the toothbrush before applying it to the shower door seal.
5. Dry the seal with a clean cloth.

Note: there are several things to remember when cleaning cement slurry with chlorine bleach. Bleach can cause discoloration or discoloration, so you should be careful not to use it on colored cement pastes or shower tiles. Chlorine bleach produces fumes that can irritate your eyes, respiratory tract, and skin, so it is recommended that you wear rubber gloves, goggles, and masks when using bleach to remove shower fluid. Besides, when cleaning with bleach, make sure that the windows are opened or the room is well ventilated, and keep the windows and doors open for one to two hours after cleaning the grout to ensure that all harmful fumes are removed from the room.

Conclusion