How Bath Screen Can Help You Live a Better Life

introduction to the bath screen seal

A bath screen is simply something which seperates the wet and dry part of the bathroom.

“Dry and wet separation”, make for an importation partition for the wet area (bathroom) and dry area (washing, toilet) in the bathroom.

Five benefits of bathroom partitions:

1. Avoid dry area flooding, stagnant water

2. Bathing and washing, no conflict in the toilet

3. Increase the service life of the bathroom cabinet

4. Health and environmental protection to prevent bacterial growth

5. When bathing, keep warm

Now, “dry and wet separation” has become a decoration trend. A beautiful and practical shower room is not as difficult as you think to make.

Two ways to separate wet and dry in shower room

1. The most cost-effective shower curtain partition

2. Most commonly used: glass partition

1. The most cost-effective shower curtain partition

Advantages: suitable for small bathrooms, cheap

Disadvantages: limited waterproof and moisture barrier performance

After a steaming shower, the water vapor on the curtain slides down . And there is still a pool of water outside the shower area.

If you want to save money, you can use the shower curtain. but please put the water retaining strip on the outside of the shower curtain. The more “inside” shower curtains need to be matched with strong magnetic strips to prevent the shower curtain from smashing with the body.

The water retaining strip is a key to retaining water in the shower room. Without it, the bathroom cannot be separated from wet and dry.

How do you choose a water barrier

First of all, the most important thing is his waterproof performance.

secondly choose the right shower space. In the final installation, you should avoid the precautions and prevent errors.

How does the magnetic seal create a water barrier

PVC material bathroom water barrier is a cost-effective bathroom water barrier. The PVC water-proof bathroom water barrier is waterproof and strong in plasticity. So as to adapt to the circular shape, the shape of the shower and the square shape of the shower room. A magnetic waterproof strip is installed under the shower room screen. Install a metal wire under the shower curtain, built-in strong magnetic. It can firmly hold the shower curtain underneath, and it has a good waterproof effect.

Magnetic strips should not be magnetically selected. Non-built magnetic strips are prone to stains. The built-in magnets are more hygienic. It is best to prepare them before making tiles in the bathroom.

Most commonly used: glass partition

Advantages: beautiful, transparent

Disadvantages: high process requirements, clean

If the bathroom space is sufficient. It is recommended to use glass screen. The shower curtain can not gather water vapor, the insulation is not good.

After a smooth shower, the cleaning problem also halved the bathing. The glass partition can effectively block the humidity and keep the space bright.

And it is definitely better than the shower room of the hotel.

4 styles of bath screen room

1.semi open bathroom

2. freestanding bathroom

3.square / gemstone bathroom

4.curved bathroom

semi open bathroom

The shower area and the toilet (or sink) are on the same side. Simply make a flat glass partition, which is simple and straightforward.

The semi-open wet area partition glass bottom should be close to the ground and treated with waterproof glue.

The partition glass can also be made into “half wall and half glass”.

As with the shower curtain above, although it is half open, it is still necessary to remember to install the water barrier.

freestanding bathroom

The irregular wall formed after the bathroom is made into a tube can be used as a “one” shape partition.

Blocking the shower space is easy to cause oxygen deficiency, so the top should be 8~9cm away.

There is plenty of space in the separate bathroom, and there is a floor on one side for storage and easy to sit and scrub.

square / gemstone bathroom

This is probably the most popular type of partition.

The square bathroom is beautiful and almost invisible. Gems-shaped bathrooms require fixed fittings. But they are practically convenient from a practical point of view. Especially when the toilet is crowded in a small corner.

If you don’t pursue transparency, the glass on both sides of the gem-shaped bathroom can be replaced with brick walls to protect privacy and store convenience.

curved bathroom

Suitable for families with high home budgets.

The curved bathroom is more suitable for the square bathroom of more than 5m2, combining the gem-shaped space and the beauty of the square.

But the sliding door is curved glass, sometimes customized according to your home, and the budget is higher.

There is also a whole massage bath room available in the bathroom.

How to solve privacy problems of bath screen

One of the benefits of partitioning is to ensure bath privacy.

If you use a glass partition, you can use a frosted glass film: a tempered glass explosion-proof film on one side and a frosted film on the other side.

Is it safe to use bath screen partition

The self-explosion of tempered glass is not a high probability event, and most of them are related to the quality of the glass itself.

In order to be safe, use tempered tempered glass, so that even if it bursts, it will not break.

how to clean a bath screen

The bath screen is better than you think. Even in areas with heavy scales, a simple scraper cleaning once a week is enough to ensure that the glass is translucent.

You can buy a bottle of weakly acidic glass cleaner and spray the cleaner onto the sponge.

Then use a glass scraper to scrape it off, it can be used for less than 5 minutes, which is very convenient.

how to install bath screen seal

A good shower space will make your home feel warmer and let you relax on a busy day.

The partition of the shower room should be separated by bath screen, and the glass partition wall can achieve good dry and wet separation.

The shower glass is very clean and very safe. The choice of shower room only needs to meet your needs.

Give you a few tips for installing a bathroom screen to make your decoration more worry-free.

Before making the bathroom glass partition, first lay the floor tiles and wall tiles. Then customize the bathroom glass partition according to the actual size of the bathroom. Pay attention to the possible errors in the wall. Pay attention to the small details. Customized glass doors are easy to install and use.
Bathroom glass partition needs special attention. Because the bathroom is special. It is in frequent contact with water every day. Therefore, it is necessary to install a water pipe before laying the floor tiles. Install the floor drain in advance. In order to avoid water accumulation in the bathroom. This can cause inconvenience in life.

What are the details of the bathroom glass partition? Glass doors with door frames can block water. If you need it, you can buy a glass door with a door frame. If there is no door frame, special installation of the threshold stone. The threshold stone is usually 1.5 cm to 2 cm above the ground. In order to stop the water from flowing out of the door, the purpose of the wet and dry partition can not be achieved.

When the bathroom glass is cut off, do not use the glide path in the bathroom partition. Because the water and dust in the slide are difficult to clean. It will smell bad after a long time. Don’t leave hidden dangers for future life for the sake of a moment of beauty.

The best way to install a bath screen

1.to achieve firm and stable, wear and pressure resistance. And it can effectively prevent and ensure that the pulley does not derail.

2. beautiful appearance and home environment can be freely matched. And the stability is good. Be sure to not shatter because of long-term collisions. Therefore, the anti-vibration strips of the general partition doors are made of PVC non-toxic soft materials. This will make the product more environmentally friendly.

3.The glass bathroom door should have a high sealing performance. Generally, the material of the partition door material is equipped with magnetic attraction. This will be able to suck tightly with the door leaf. Moreover, the position of the door can be adjusted efficiently. It plays the role of dustproof, soundproof and heat insulation.

conclusion